2022 Sydelmann MRU 1800

Seydelmann MRU 1800 Technical Description

Industrial batch mixer-grinder for meat and food processing

The Seydelmann MRU 1800 combines batch mixing and mechanical grinding in one machine. Product is mixed in the stainless-steel hopper, then conveyed through the grinding assembly to produce a uniform particle size. The unit can perform mixing and grinding together or separately, according to the operating setup and product requirements.

Technical specifications

Manufacturer / model

Seydelmann MRU 1800, Germany

Machine type

Industrial batch mixer-grinder

Hopper volume

1,300 liters (manufacturer-published MRU 1800 specification)

Mixing capacity

Up to 1,000 kg, depending on product (manufacturer-published specification)

Working batch based on product

Grinding plate

200 mm diameter, manufacturer-published MRU 1800 specification

Electrical supply

480 V, 3-phase, as specified; confirm frequency, full-load amperage and motor data on nameplate

Construction

304 stainless steel, as specified; we can confirm grade for each product-contact component

Controls

Push-button control station visible in the supplied photograph

Operating principle

The mixing shafts and paddles blend the batch and distribute ingredients. A feed mechanism moves product toward the grinding worm, which forces it through the knife and perforated plate. The selected plate and knife condition determine the grind size; feed rate, product temperature, formulation and cutting-set condition affect throughput and final texture. Product is discharged from the grinding head or the machine discharge arrangement, depending on configuration.

Capacity and specification notes

The 1,000 lb figure is the stated working batch for this unit; it is not the hopper volume. Seydelmann publishes the MRU 1800 with a 1,300-liter hopper and mixing capacity up to 1,000 kg, depending on product. Actual usable batch size depends on product density and operating conditions. Electrical and stainless-steel details above are based on the supplied specifications and should be checked against the machine nameplate and material records before install